Many men thought about an increase in the penis, but the methods they are familiar with are somewhat frightened.In medicine, there is such a tool as a vacuum pump.
It is used for operations on male genitalies to maintain the size of the penis.
How the pump acts
The principle of operation is quite simple.With the help of a vacuum around the penis, a weak pressure occurs, causing stimulation of blood circulation.Due to this, the cavernous tissues are filled with blood, due to which a rapid increase and hardening of the penis occurs.A similar phenomenon in medicine is called hyperemia.
During an erection, the fabric of the penis is poured with blood, from this they swell strongly.The vacuum pump stimulates the vessels and allows you to maintain a member size from 30 to 60 minutes.Also, this device can be used instead of a massage.
The pressure in the flask expands the cavernous bodies, significantly increasing blood flow and the size of the penis.The member after the pump looks much more spectacular than with ordinary excitement.
Do not abuse vacuum pump during use.The genitals will not become more from this than it should, but bleeding, bruises and other complications may well occur!
Varieties
All vacuum pumps have a similar design, not taking into account their principle of action.The vessel in which the male organ is located is a plastic flask with divisions.Together with her, in the set there is a nozzle of the seal and a pear, which pumps the pressure inside the flask.
There are devices with additional devices: pressure adjustment buttons, manometers, valves for reset.
In manual air is pumped up and removed with a pear or piston.Their application is good in that they are available to every man who wants to increase their genitals.
In automatic vacuum, it is created using an electric pump working on batteries.The pressure can be monitored on a mounted pressure gauge, and some samples are equipped with a button for the absorption force.
Water devices are a more modern option for an increase in the male penis.Their principle of action is based on the fact that instead of air, the flask is pumped with water with a pump.The hydraulic foam has greater efficiency, and the life of it is longer.
How to choose a pump?
The device is selected according to two criteria: in terms of genitals and a specific task.
- The length of the vessel should be at least 2-3 cm larger than the penis in an excited state;
- The diameter of the flask must be selected 1-2 cm larger than the diameter of the male member during an erection;
- For those who do this for the first time, experts advise using manual pomp, where air pumping is carried out with a pear.
It is better to buy an apparatus with a transparent flask to monitor the process, and also pay attention to the strength of the material from which it is made.
Pros and cons
A vacuum pump for men can not only increase the size of the penis, but also have a therapeutic effect.If you use it constantly, the volume of male genitalia is increasing over time, and during sexual intercourse, the erection remains much longer.This is due to a decrease in the sensitivity of the organ.
Moreover, male dignity increases not only in length, but also in width.
Also, under the influence of a vacuum, you can adjust the shape of a male organ, especially if it has a curvature.Inside the pump, the penis is held evenly from the edges of the walls, in this way it is straightened.
The consequences of improper use:
- Due to the violation of the capillaries, peculiar spots arise on the skin of the penis;
- reduction in ejaculation or erection;
- numbness.
Efficiency when using
With constant use, after six months the shape and size of the penis will become unchanged.The result will be much more effective if you take medications that increase the release of male hormones during this time.
The member after the pump became up to 3 cm longer, for a period of 6 months to a year.The thickness of the dignity increased to 2 cm.
Instructions for use
If the vacuum pump is used for the first time, the process should not last more than 5 minutes to avoid unpleasant consequences.Incorrect use can lead to disorders of some functions, as well as edema.
To prevent this from happening, the following recommendations must be followed
- First, air must be pumped out of the device, this will improve the circulation of blood flow in the penis.Previously, it is necessary to take care of the lubrication of the penis.
- One penis increase should not last more than 20 minutes.
- To reduce the pressure inside the vessel, you need to start air.To do this, just press on a special valve placed near a pear.In some models, for these purposes there is a small hole that is covered with a finger during the procedure.
- After the member has reached maximum hardness, you need to put on a ring on its base, which provides an overgrown with an organ and holds it in a state of erection.
- If a pump with a hydraulic pump, then before the procedure it is necessary to take a relaxing bath with hot water.After that, after 8 minutes, male dignity must be placed in a vacuum vessel.The ring should fit tightly to the scrotum, thereby lowering the pressure in this area.The device is placed in such a way that the distance from the penis to the walls of the flask is the same from all sides.It is important to do this before the moment of suction begins.Observing these instructions, injuries can be avoided.
- To form a vacuum environment, experts advise making several oscillatory movements.Then the excess water is lowered using a trigger.Sometimes the pump must be pressed several times so that the entire excess fluid leaves.
- After the water descent, you can rest a little, then proceed to the procedure.If the pressure falls, it must be pumped to the required level.
Male advantage can be increased using a set of special exercises, but for this it is necessary to follow all the recommendations for the use of the device.
Throughout the first week, the procedure is carried out 10 minutes once a day.
In the second week, 15, for the third 10 minutes twice a day.
The fourth - twice a day for 15, the fifth - 20 minutes in the morning and 10 in the evening.
Possible consequences
With improper use of the device, injuries often occur.
- Due to the stagnation of the lymph, a swollen ring appears around the head of the penis.Sometimes this problem can occur even with proper use.In such cases, it is better to stop the procedure for a while.
- As a result of prolonged manipulations or low pressure in the vessel, a huge flow of lymph occurs, forming swelling.
- The deterioration of an erection is the most common consequence.
- With a strong load, a change in the color of the skin may occur.Due to severe discharge, bleeding often occurs, which can be irreversible.
- Bloches of blood vessels is the rarest problem, but dangerous, so it is better to postpone the venture to increase the penis.
Contraindications
The duration of the vacuum environment is determined by cell expansion.Subject to all recommendations for the use of the device, a pulse effect is created inside the vessel.With its increase, negative pressure occurs, which causes numbness, and a person does not feel pain.
The maximum volume of vacuum should not cause pain, but a single effect of not more than 18 seconds.The duration of vacuum manipulations per day should not exceed 45 minutes.
The male penis of the member has the following contraindications:
- diabetes mellitus;
- sexually transmitted diseases;
- inflammation of the urethra;
- deterioration of the functions of the excretory organs of the digestive system;
- cardiovascular pathologies;
- The risk of blood clots.
Operation of the device
In order for the device to retain its suitability as long as possible, it needs special care.Given that manipulations are carried out in an intimate place that requires careful compliance with personal hygiene rules, the pump must be treated with antibacterial solutions.
Before use, it is recommended to wash the vacuum pump with warm water and soap, and treat all its components with antiseptics.After the procedure, this invention is again sterilized, wiped and stored in a clean, dry place.
How to do it yourself?
The device can be useful not only to increase the size of the genital organ of a man or healing therapy.
The pump can be made from improvised means that are stored in the garage or pantry.
From the cuff pump
Before you start manufacturing, it is necessary to prepare all spare parts and tools that can be useful for use.A vacuum pump is usually made from a car or a bicycle cuff pump.This is the simplest and most reliable method.
First you need to create the opposite effect of the pump so that it does not supply air, but on the contrary, pull it out.To carry out such an effect, it is necessary to unwind the pump, turning the cuff with the back side, then assemble the device.This will create a vacuum environment.
Next, mount the check valve for the descent of excess air.The valve of the aquarium compressor is suitable for this.It is mounted in the pump hose to prevent air penetration into the pump.For a greater effect, it is advised to make its sealing.
This method is the simplest, and is designed to create a shallow vacuum environment.The performance is up to 80% air pumping.If you need to make a more powerful pump, you can use a household compressor.
Using a medical syringe
We make a vacuum pump from a regular medical syringe.For this, the following materials will be needed:
- plastic tee;
- a plastic tube, which should coincide with the diameter of the holes of the tee and syringe;
- two valves from the aquarium compressor;
- The syringe (the power of the future device depends on its size).
From the plastic tube, it is necessary to cut three pieces of 10 cm, then attach them to the tee.The joints should be hermetic and well fixed so that they do not jump out when pressure occurs.The tee with three bouncers should be obtained.
One of them, which is located in the center, is attached to the nose of the syringe.On the remaining two ends, it is necessary to install the valves, and one should open out, the other inward.In order not to confuse, arrows are usually placed on aquarium valves indicating the direction of air movement.
Such a device made from a syringe can pump liquid from one container to another.
To carry out the procedure, one withdrawal with a valve is lowered into the liquid, and the second in an empty vessel, which needs to be filled.The pump is driven using a piston.